Brushes, Corks, Scrapers

Scope of use: the brush serves for removing the wax from the ski and snowboard running surface structure, for cleaning of the running surface using a scraper, for cleaning and opening the running surface before waxing, and, for increasing the wax absorption in the running surface, for running surface polishing. The nylon brush ranks among multi-purpose economic brushes.

Directions for use: force and pressure depend on the type of use, so, if you remove the wax, exert a higher pressure on the brush, and, if you polish the running surface, exert less pressure. Brush always in one direction from the ski top to the bottom end. Likewise, keep brushing in one direction of brush fibres (a direction arrow has been indicated for this purpose on the brush).

Scope of use: Nylon polishing brush serves for running surface polishing, namely both between individual phases of ironing in and wax final finish.

Directions for use: for running surface polishing exert less pressure on the brush. Always brush in one direction, from the ski top to its bottom end. Likewise, keep brushing in one direction of brush fibres (a direction arrow has been indicated for this purpose on the brush).

Scope of use: Combined brush is universal, intended for wax removal from ski and snowboard running surface structure, for running surface cleaning, after using a scraper, for running surface cleansing and opening, prior to waxing, and, for increasing wax absorption into the running surface, and, for running surface polishing.

Directions for use: force and pressure exerted on the brush depend on the type of use. If you remove wax, exert bigger pressure on the brush, and, if you polish the running surface, exert less pressure. Always brush in one direction, from the ski top to its bottom end. Likewise, keep brushing in one direction of brush fibres (a direction arrow has been indicated for this purpose on the brush).

Scope of use: Bronze brush serves for running surface restoration, cleaning and opening of the running surface, before waxing. Using the brush, you will increase wax absorption into the running surface.

Directions for use: force and pressure exerted on the brush depend on the type of use. If you remove wax, exert bigger pressure. Always brush in one direction, from the ski top to its bottom end. Likewise, keep brushing in one direction of brush fibres (a direction arrow has been indicated for this purpose on the brush).

Scope of use: natural cork of a 70x50x40 mm size is employed for rebound zone protection, before climbing wax application. Warming-up the running surface prior to the wax application, increases the wax absorption into and adhesion to the running surfaces. In addition, it is employed for spreading over, polishing and wax final finish.

Directions for use: force and pressure exerted on the cork depend on the type of use. When preparing the rebound zone, exert bigger pressure and lower speed, and, when polishing the running surface, use normal pressure, but increase the corking speed. Use the cork always in one direction, from the ski top to its bottom end.

Scope of use: plastic scraper for wax removal and spreading over. The scraper has a size corresponding to the snowboard running surface width. Its use facilitates a uniform wax application on the wide snowboard running surface.

Size: 33x7 cm, thickness 5 mm

Scope of use: plastic scraper for wax removal and spreading over.

Size: 6x12 cm, thickness 3 mm

Scope of use: plastic scraper for wax, respectively, Clister removal and spreading over.