DISPERCOLL D3 5 kg

Scope of use: Dispercoll D3 is an adhesive intended for waterproof gluing in resistance class D3 (exterior without permanent contact with water). It creates high-strength elastic bonds. It has no effect on cutting tool edges. It is suitable for gluing wooden furniture to be placed in a humid environment, production of outside windows and doors, floating floors in parquet slip-tongue joints, for gluing hard solid and exotic woods. The adhesive may be applied starting from 5 degrees Centigrade above zero.

Directions for use: employ in original condition (it may be diluted with at maximum 5 percent of water). The adhesive does not change the wood colour shade. It is necessary to avoid any contact with metals, e. g. iron oxide, which could cause glue bond colour changes due to effect of pH of the adhesive. The latter is provided with an applicator for gluing the sliptongue joints. On larger surfaces the adhesive should be applied on both parts with a brush or a toothed spatula, and, upon a mild wilting they should be clamped or loaded by force of 0.5 kg per square centimeter.

Technical parameters:

viscosity 2000 mPa.s; waterproof class D3; pH 3
dry matter at minimum 52 per cent
glue bond strength at minimum 10 MPa at exposure No. 1, at minimum 2 MPa at exposure No. 3, and, at minimum 8 MPa at exposure No. 4
time required before working manually - 3 hours after gluing, cutting mechanically - 24 hours after gluing
open time 7 minutes; drying time 15 minutes it does not contain organic solvents; it is water-dilutable

Spreading rate: 150 to 300 g per square meter